TL;DR
Get business pricing on tools and workshop supplies
- Business-only prices and quantity discounts
- Tax-exempt purchasing
- Multiple users, one account, clear invoices
Pro Tool Reviews tested Metabo HPT’s NR1890DRBQRY 18V cordless framing nailer and reported strong driving performance, a firing rate of up to six nails per second and an 8.2-pound bare-tool weight. The review also noted that clearing a jam requires a Torx wrench and that the nailer is relatively expensive; the manufacturer’s battery-life figure is a claim, not an independently confirmed result in the report.
Pro Tool Reviews has tested Metabo HPT’s NR1890DRBQRY, an 18V cordless framing nailer designed to deliver a pneumatic-like firing experience without an air hose. The reviewers reported a firing rate of up to six nails per second and a bare-tool weight of 8.2 pounds, while also identifying tool-based jam clearing and price as drawbacks for contractors weighing cordless options.
In its hands-on test, Pro Tool Reviews drove 3½-inch framing nails into laminated veneer lumber (LVL), a demanding material for a framing nailer. The tool initially drove nails too deeply, but reviewers said that after adjusting the depth setting, it drove them flush. The review lists 120 joules of driving power and describes the firing response as having virtually no ramp-up when the trigger is pulled. Those are the review’s reported specifications and observations, rather than results from a published independent laboratory test.
The nailer offers sequential and bump-fire modes. Reviewers said bump firing can reach six nails per second, but cautioned that recoil becomes noticeable, particularly in harder materials, making maximum speed less suited to precise work. They found the nose claw and slim nose profile helpful for toe nailing and access between framing members. A depth-adjustment knob sits at the top of the nose.
Pro Tool Reviews measured the tool at 8.2 pounds without a battery and 10.3 pounds with the included 18V 10.0Ah battery. The report compared the latter favorably with a Milwaukee M18 Fuel 2744 listed at 11.3 pounds with a 5.0Ah battery, while noting that battery configurations differ. The reviewers praised the nailer’s balance and handling overhead, but said its large grip may not suit users with smaller hands. They did not encounter a jam during testing; the review says clearing one requires removing two screws with the onboard Torx wrench and sliding the magazine down.
Speed Without an Air Hose
The review addresses a central trade-off for framing crews considering cordless tools: mobility versus the speed and familiar response of pneumatic equipment. A nailer that performs quickly without a compressor or hose can reduce setup needs and make movement around a jobsite easier. Pro Tool Reviews’ test suggests this model can handle demanding framing tasks, including driving long nails into LVL, though its recoil and high-speed bump-fire capability may be less useful when accuracy matters more than pace.
Weight also affects a tool used repeatedly over a long workday. At 8.2 pounds as a bare tool, the nailer’s mass is a notable part of the review, alongside its reported balance and maneuverability. The practical value depends on the user, battery choice and work being done: the tested setup weighed 10.3 pounds, and the reviewer noted the grip could be uncomfortable for some hand sizes. The review is a useful point of comparison, but it does not establish how the nailer performs across every jobsite or over long-term use.
Metabo HPT cordless framing nailer
As an affiliate, we earn on qualifying purchases.
As an affiliate, we earn on qualifying purchases.
Metabo HPT’s Air Spring Approach
Metabo HPT’s NR1890DRBQRY uses the company’s Air Spring Drive + System on an 18V platform. The source review presents that system as the basis for a pneumatic-like feel without a compressor. Cordless framing nailers have generally faced comparisons with pneumatic models on firing speed and handling; this review focuses on whether the new model narrows that practical gap through speed, driving power and reduced dependence on air equipment.
The report says Metabo HPT claims up to 1,170 nails per charge with the kit battery, about 300 more than the company’s 36V MultiVolt NR3690DR. That figure is a manufacturer claim cited by the review. The supplied report does not describe a test that independently verified the claimed number, so it should not be read as a guaranteed result for every battery, material or firing pattern.
“Metabo HPT absolutely hit the mark.”
— Pro Tool Reviews
18V cordless framing nailer with bump fire mode
As an affiliate, we earn on qualifying purchases.
As an affiliate, we earn on qualifying purchases.
Battery Life and Long-Term Use
The supplied review does not state its publication date, purchase price, or the conditions used to assess the claimed 1,170 nails per charge. Battery life can depend on materials, firing mode, nail size and work habits, and the report does not provide enough test detail to determine how closely typical jobsite use would match the claim. It also does not establish long-term durability or compare performance across an extended range of framing conditions.
Reviewers did not experience a jam during their hands-on testing, so the practical frequency of jams is unknown. The article describes a procedure that requires a Torx wrench and removal of two screws, rather than a quick-release latch. The review recommends removing the battery and any remaining nails before clearing an obstruction to reduce the risk of accidental discharge. The exact price and how the grip feels to individual users are also not specified in the supplied source.
As an affiliate, we earn on qualifying purchases.
Check Fit and Kit Pricing
For buyers, the immediate next step is to compare the nailer’s price, battery kit and local availability with competing cordless models and pneumatic equipment. Pro Tool Reviews advises prospective users to handle the tool at a retailer, particularly if grip size is a concern. Contractors should also weigh the tested handling and firing performance against the less convenient jam-clearing procedure.
No follow-up test or additional manufacturer announcement is identified in the supplied material. Further reporting would be needed to verify the battery-life claim under specified conditions, assess durability over time and establish how the model performs across different framing tasks. Until then, the published findings remain a hands-on review of one model, not a broad or independently standardized comparison of all cordless framing nailers.
cordless nailer for framing and construction
As an affiliate, we earn on qualifying purchases.
As an affiliate, we earn on qualifying purchases.
Key Questions
What did Pro Tool Reviews test?
The outlet tested Metabo HPT’s NR1890DRBQRY 18V cordless framing nailer, including driving 3½-inch framing nails into LVL and examining its firing modes, handling and jam-clearing design.
How fast can the nailer fire?
The review reports a rate of up to six nails per second in bump-fire mode. The reviewers noted that recoil is noticeable and that this speed may not suit precise work, especially in harder materials.
How much does the tool weigh?
Pro Tool Reviews reports a weight of 8.2 pounds without a battery and 10.3 pounds with the included 18V 10.0Ah battery.
Is the 1,170-nail battery figure confirmed by the test?
No. The figure is described as Metabo HPT’s claim. The supplied review material does not report an independent test confirming that number or specify the conditions behind it.
What are the main drawbacks identified?
The review lists tool-based jam clearing and a relatively high price as drawbacks. It also says the grip is large, which may be an issue for users with smaller hands; the supplied material does not give a specific price.
Source: rss
Fall yard work Picks
leaf blowers
As an affiliate, we earn on qualifying purchases.
